Download the OBD Tool Updater for Windows or for Mac.

After finishing the download, you may access the app either on your desktop or by searching for 'OBD Tool Updater' on your PC.

Double-click on the application to open. 

The software will initially be displayed as 'Disconnected.'

Also, If using a USB charging cable, and not a USB data cable, you'll get the 'Disconnected' message.

1.Charging cables: Can only charge devices, but cannot transfer data. These are commonly called “Charge-only” cables.

2.Data cables: Does both; charges your devices and transfers data.

After installing the Updater app

Connect your tool to your computer using a USB data cable that fits your tool (it may be a USB-C depending on the tool). Wait a few seconds for the software to detect it.

The tool status will now appear as 'Connected.' It will also display the Firmware, Bootloader, and Database that the tool is currently at.

If the tool is connected to the computer but the app shows a 'Disconnected' status, perform the following:

Please make sure that the USB data cable is connected to the computer and that your tool are properly seated.

Try switching to a different USB port on your computer.

Try another USB cable.

• Please make sure that the USB cable is connected to the computer and your tool are properly seated.
• Try switching to a different USB port.
• Try another USB cable.

Possible Issue: You're seeing the below issue on your Mac.

If you are on an apple device and get this issue:

• Instead of 'double clicking' on the app, please 'right click' and select Open and the app should open correctly.

Wait a few more seconds for the software to check for updates. If updates are available for your device, it will provide the option 'Update my tool now'. Select this option to begin the update process. This process may take some time. When your update is stuck at 1% (or 5%) and not progressing, perform the following:

• Uninstall the updater app from your computer.
• Reboot your computer.
• Disable any Antivirus.
• Reinstall the updater.
• Attempt the update again by following the steps in this guide.

If you have tried the above procedures but the issue remains unresolved, follow the instructions below:

• Swap out the USB cable with a new one.
• Switch USB ports.
• Switch to a different computer.
• Try updating again.

Your updater may be out of date.

• Please install the latest updater for your tool
• Download the updater app.
• Click to install, when seeing the option to "Modify, Replace, or Repair".
• Click Repair
• Then follow the steps in this guide again.

While your device is updating, please make sure to keep it connected. 

The update will be divided into individual steps such as bootloader, firmware, and database. This process may take up to 25 minutes. Please wait for all steps to complete.