BLCKTEC 420: Viewing In Use Performance Tracking

Purpose

To guide you on how to view the in-use performance tracking while using the BLCKTEC 420.

Introduction

The Diagnostic Tool can retrieve In-use Performance Tracking (IPT) statistics for monitors supported by the vehicle under test. Two values are returned for each monitor; the number of times that all conditions necessary for a specific monitor to detect a malfunction have been encountered (XXXCOND), and the number of times that the vehicle has been operated under the specific conditions for the monitor (XXXCOMP). Statistics are also provided for the number of times the vehicle has been operated in OBD monitoring conditions (OBDCOND), and the number of times the vehicle’s engine has been started (IGNCNTR).

Step 1 - With the Diagnostic Tool in OBD2 mode, press and release the MENU/ENTER ↵.

Press and release the MENU/ENTER ↵ button twice.

Step 2 - Select Vehicle Information, then press the MENU/ENTER ↵ button.

Select Vehicle Information then press the MENU/ENTER ↵ button.

The Main Menu will display.

Step 3 - Select IPT, then press MENU/ENTER ↵.

Press the DOWN ▼ button to scroll down to go through the options, select IPT then press the MENU/ENTER ↵ button.

The Vehicle Information menu will display.

Step 4 - When the retrieval process is completed, the In-use Performance Tracking statistics for the vehicle are under test display.

If In-use Performance Tracking is not available for the vehicle, an advisory message will display.

Select Back to return to the Vehicle Information menu or select Exit to return to the Main Menu.

Step 5 - When you have finished viewing the statistics, select Back to return to the Vehicle Information menu, or select Exit to return to the Main Menu.