BLCKTEC 420: Enabling/Disabling the audible tone

Purpose

To guide you on how to enable and disable the audible tone while using the BLCKTEC 420.

Introduction

Turns the Diagnostic Tool’s audible tone 'on' and 'off.' When turned 'on,' a tone sounds each time a button is pressed.

Step 1 -Select Audible Tone in the Main Menu, then press the MENU/ENTER ↵ button.

Press the MENU/ENTER ↵ button twice to access the Main Menu.

Press the DOWN ▼ button to scroll down through the options, select the Audible Tone in the main menu, then press the MENU/ENTER ↵ button.

Step 2 - Select On or Off as desired. Once selected, the screen will auto-return to the Main Menu

Press the DOWN ▼ button to scroll down through the options, select ON or OFF, then press MENU/ENTER ↵.
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us