Preview Changes will not be visible to customers until published.

BLCKTEC 440: Initial Setup

Purpose

To help you choose the language and desired measurement for your BLCKTEC 440.

Initial Adjustments

The first time the unit is connected to a vehicle, select the desired display language (English, French, or Spanish), and unit of measurement (Standard or metric).

Step 1 - Select the desired display language, then press ENTER ↵.

 The first time you connect to a vehicle, choose the desired display language (English, Español, Français), then press ENTER ↵.

Note: You can make changes to these selections using the tool’s MAIN MENU function. On the Menu page, press the UP ▲ and DOWN ▼ button to scroll down to go through the options and select 'Language Selection' then press ENTER ↵. 

Step 2 - Select the desired unit of measurement, then press ENTER ↵.

The Unit of Measurement screen will display.

Select the desired unit of measurement using the UP ▲ and DOWN ▼ button, then press ENTER ↵.

Note: After the initial language and unit of measurement selections are performed, these, as well as other settings, can be changed as desired. You can go to the Tool Settings for more instructions.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us