RepairSolutions2: Setup BLCKTEC Dongle with Android.
Step 1 - Get the RepairSolutions2 App.
On your Android phone, download the RepairSolutions2 App from Google Play. You can view the app's information online here: Google Play Store Alternatively, you can:
|
Step 2 - Create an account.
Once installed, open the App and select Create an account. | |
Fill up your details then read and check the box I agree to the EULA/Terms and Privacy Policy. After completing these steps, select Continue. |
Step 3 - Proceed to the app.
Select Yes to begin connecting the app with a compatible scan tool. |
Step 4 - Follow the instructions on the screen.
A Bluetooth connection is required for your app to work with your device. Make sure that your Bluetooth is turned on before you begin pairing your device and while performing a scan using your Dongle device. You can select Go to settings to turn on your Bluetooth. |
|
Plug your Dongle into your Vehicle. If you are unsure where to plug your scan tool device into your vehicle, select the option Show me where at the bottom of the description to find your OBD2 DLC Port. |
|
Turn your vehicle to the ON position. You do not need to start your vehicle. Select the option Show me how at the bottom of the description for details on how to turn the ignition on. |
|
After following the instructions and checking all three boxes on the screen, select Continue. |
Step 5 - Pairing to the dongle.
Wait for the RS2 app to search for your device. Select your device once it appears on the list. |
|
Give your OBD2 device a moment to pair with the app. | |
Once the Success prompt appears in the app, select Continue. |
Step 6 - Select an option to begin scanning your vehicle.
Once your tool is paired with the RS2 app, the system will allow you to begin scanning your vehicle for codes and engine problems. |